- DRI Plant - 4 nos. of 500 TPD (0.72 million TPA) and 6 nos. of 300 TPD rotary kilns (0.6 million TPA)
- 0.8 million TPA coke oven plant
- 2.5 million TPA sinter plant
- 1.25 million TPA and 0.42 million TPA Blast Furnace
- 2.0 million TPA and 1.25 million TPA steel melting shop
- 2 vacuum degassing units
- RH degassing unit
- 1 No. single strand slab caster
- 1 No. of 6-strand billet-cum-round caster and 1 No. 6 strand billet caster
|
- 2 Nos. of 4-strand combi –caster
- Rail & universal beam mill (RUBM) (0.75 million TPA)
- Plate-cum-coil Mill (1.0 million TPA)
- Submerged arc furnace (SAF) (0.03 million TPA)
- Oxygen plant 37683 Nm3/hr
- Lime and dolomite calcinations plant (0.4165 million TPA)
- 358 MW captive power plant(CPP)
- 0.7 million TPA Medium & Light Structure mill
|
JSPL is recognised as a leader in manufacturing coal-based sponge iron in India. First commissioned in 1991, JSPL leads the Indian market in this sector and has the world’s largest coal-based sponge iron plant, with a capacity of producing 1.32 MTPA DRI. It is the only sponge iron manufacturer in the country with captive raw material resources and power generation.
 Commissioned in 2003, the mill has a wide range of products ranging from long rails up to 121 meter to medium and large size parallel flange beams and columns. The product mix includes: Track Rails, Crane Rails, Parallel Flange Beams and Columns and Channels
To enhance its productivity & consistency in quality, the new tandem mill, the first of its kind in India, was purchased from SMS Meer, Germany, and installed & commissioned in Nov. 2006, in which its patent X-H technology is adopted for rolling of beams and columns. Other sections like rails and channels are also rolled via the universal route.
Introducing newer technologies, JSPL has installed a plate mill, which manufactures the widest plates of 3.5 metre in coil form and coils of 3 meter width. It commenced commercial production from April ’07 and has a production capacity of 1 MTPA. The mill has been consistently producing plates and coils in various grades like EN, DNV, BS, ASTM, JIS, LRS and ABS certified by CII.
 Furthering our endeavor to provide a complete product basket and an enhanced structural section range to its customer, JSPL is proud to announce the commissioning of its new state-of-the-art 0.6 MTPA capacity Medium and Light Structural Mill (MLSM). Equipped with advanced rolling mill technology and equipments from DANIELI, ITALY, it has facility of rolling Parallel Flange Beams (100-300 mm), Channels (75-300 mm), Angles (100-200 mm), Flats (50-300 mm) & Rails (30 Ib/y & 24 Kg/m). The mill is ISO 9001 and 14001 certified and also having BIS certifications for most of the sections.
|